Brancheneinblick

Reference Guide

Quick Reference Guide

EnerSys® delivers the most effective, powerful and reliable batteries available. With a full range of racks, cabinets and accessories available, a complete integrated system can be offered for any application.

MEHR ERFAHREN

Whitepaper

Implementing Nanogrid into the Critical Facility

Operators are looking at introducing nanogrid architectures into critical facilities to maintain reliability in the face of increased thermal loading and to eliminate points of failure. Nanogrid architectures will further enable the use of distributed energy resources (DERs) such as wind or solar to supplement utility power, allowing operators to realize additional cost benefits by avoiding peak usage utility rates or selling power back to the grid.

MEHR ERFAHREN

Whitepaper

The Benefits and Challenges of Deploying 5G Small Cells on the HFC Strand Network

Cable operators are deploying small cell radios through their existing HFC network infrastructure to offload data and associated costs of offering mobility services through a mobile virtual network operator (MVNO) arrangement. Attaching small cell radios to the existing HFC network enables rapid deployment at a fraction of the cost and time as traditional deployment methods.

MEHR ERFAHREN

Whitepaper

Advanced Communication Energy

Advanced Connected Energy is a technique which embeds a low energy communication device into a lead-acid battery to communicate via Bluetooth® Low Energy to a smartphone app, SDK, or controller. The chip provides real-time access to performance when the battery is in service as well as charge status while the battery is stored in a warehouse.

MEHR ERFAHREN

Whitepaper

Understanding Fault Managed Power

In 2020, operators, manufacturers, and industry standards bodies began to investigate the potential for a new distributed power technique that could deliver more power in a safe environment for technicians and the public. A new distributed powering technique called fault managed power was developed imposing no power limit under normal operation, but precisely limit energy transferred under a fault condition to mitigate shock and fire hazard.

MEHR ERFAHREN

Industry Article

Powering PON with conventional cable broadband equipment

Billions of dollars of public funding are being allocated to expand high speed broadband connectivity into unserved or underserved parts of the rural US and Canada. One of the most common methods for expanding the network is through passive optical networks (PON). PON remote optical line terminals (R-OLTs) – located in remote service areas – distribute fiber connections for homes and businesses.

MEHR ERFAHREN

Article

Getting the Most Out of Your Batteries

As expectations on network runtimes grow, and while utility outages become more frequent, multiple-system operators (MSOs) should review their deployed battery backup solutions. The challenge facing network operations is how to safely and cost-effectively increase energy densities across the hybrid fiber-coax (HFC) network.

MEHR ERFAHREN

Article

Extreme Weather—Is Your Network Vulnerable?

Pressure is consequently growing on multiple-system operators (MSOs) to solidify their distributed hybrid fiber-coax (HFC) networks against more significant power outages by extending runtimes. While longer runtimes at any HFC network site can be achieved by adding generators, batteries, or both, it is not always that simple

MEHR ERFAHREN

Whitepaper

Focusing Stored Energy Where It Matters Most

We have charted a course to meet future bandwidth needs with the 10G initiative, and new mobility offerings are leveraging the HFC network to ensure connectivity while on the go. With all of this, it has never been more important to have reliable power to keep the network up and running.

MEHR ERFAHREN

Whitepaper

Keeping the lights on

Next-generation PON implementations will likely include high speed coherent optic links from headends to new OSP aggregation nodes, enabling even faster services to extend deeper into the network. Each active optical component in our PON architecture requires reliable, uninterrupted power to keep the network running.

MEHR ERFAHREN

Case Study

Ensuring Power Continuity for KEK

The battery room replacement and overhaul project at the Kosovo Energy Corporation (KEK) stands as a testament to the pursuit of power infrastructure excellence. In this initiative, EnerSys®, in collaboration with EXBATT, successfully implemented their state-of-the-art PowerSafe® SBS XL 2 Volt batteries, revolutionizing KEK’s power capabilities.

MEHR ERFAHREN

Article

Prospective Stable Grid Float Use Cases

Having sufficient battery power back-up in non-cyclic stable grid float applications is essential across a diverse array of different application scenarios.

MEHR ERFAHREN

Article

Ensuring HFC Network Resiliency During Extended Utility Outages

This paper explores various extended run time solutions using both Lithium Ion (Li-ion) and Thin Plate Pure Lead (TPPL) batteries.

MEHR ERFAHREN

Article

Evolution in Battery Energy Densities

For decades stable grid energy storage applications have often been addressed by using either Valve-Regulated Lead-Acid (VRLA) gel tubular OPzV or flooded OPzS batteries. In a modern context, however, the drawbacks of OPzV and particularly OPzS technologies are becoming increasingly clear - and the time has now come for implementing changes

MEHR ERFAHREN

Article

Addressing the Energy Capacity Shortfall

In an increasing majority of standby float (stable grid) applications, there are expectations to ramp up energy storage capacities. In existing battery deployments, this must be done without extra space needing to be assigned for accommodating racking, etc. Across the board, higher density battery solutions are being called for.

MEHR ERFAHREN

Opinion

Achieving Greater Energy Autonomy at Data Centre Sites

With many data centre operators trying to attain carbon neutrality, they need to explore more sustainable ways of keeping up with their ever-increasing energy demands.

MEHR ERFAHREN

Opinion

Using Data Centre Resources to Support Grid Stability and Peak Shaving

There is considerable potential for data centres to employ their UPS battery assets in a grid support context to reduce running costs.

MEHR ERFAHREN

Opinion

The Benefits of Running Your Data Centre Operation with Reduced Cooling

TPPL batteries are an attractive option for data centre operators looking to run their systems at heightened temperatures and reduce their costs.

MEHR ERFAHREN

Article

Selecting Batteries That Support Data Centres’ Environmental Goals

There are growing concerns about the data centre sector's effect on the environment. Operators must prioritise this when specifying UPS batteries.

MEHR ERFAHREN

Article

The Role of Data Centres in Maintaining Grid Stability

Greater importance is being put on renewable alternatives and changing the emphasis in the power distribution network.

MEHR ERFAHREN

Article

Maximizing Battery Circularity

Batteries have a vital part to play in the continued running of data centres, when they come to their end-of-use, efforts must be made to dispose of them in the correct manner.

MEHR ERFAHREN

White Paper

The Next Era For Standby Float

The demands of customers involved in standby float (often referred to as stable grid) applications are ramping up dramatically. Here a float charge is used to constantly maintain the batteries in a full state of charge (SoC) condition – so that they are ready to respond to any interruptions in the mains supply, should that occur, and the connected load can still be supported. In the past, it was mainly the lifespan of batteries that mattered for such applications. Now, expectations are being raised in relation to other properties.

MEHR ERFAHREN

Article

Extended Runtime: How Will It Affect Your Network Infrastructure

The cable broadband network has evolved from being a vehicle for the provision of entertainment services to become a strategic element of the country’s infrastructure, providing broadband internet access to both homes and businesses. Without appropriate backup measures in place, however, network availability is only as good as the utility grid that powers it.

MEHR ERFAHREN

Brochure

Pioneering Power Solutions for Space Flight Missions

Since building the first Li-ion battery to power a satellite, the ABSL™ team developed technological breakthroughs that have extended satellite and mission lifecycles. As the space industry’s leading supplier of Li-ion batteries, ABSL has delivered on hundreds of projects and programs.

MEHR ERFAHREN

Fallstudie

Supermarktkette steigert Produktivität bei gleichzeitiger Senkung von Wartung und Kosten mit Thin Plate Pure Lead (TPPL) Technologie

Supermarktkette steigert Produktivität und senkt gleichzeitig die Batteriewartung und -kosten mit der Thin Plate Pure Lead (TPPL)-Technologie

MEHR ERFAHREN

Fallstudie

Zuckerraffinerie senkt Kosten und Produktivität durch Ersetzen von Gel-Blei-Säure-Batterien durch NexSys® TPPL Thin Plate Pure Lead (TPPL)-Technologie

Zuckerraffinerie senkt Kosten und Produktivität durch Ersetzen von Gel-Blei-Säure-Batterien durch NexSys® TPPL Thin Plate Pure Lead (TPPL)-Technologie

MEHR ERFAHREN

Fallstudie

Neue Batterietechnologie hilft, die Gewächshausproduktion in Gang zu halten

Neue Batterietechnologie hilft, die Gewächshausproduktion in Gang zu halten

MEHR ERFAHREN

Fallstudie

Universität erhöht Batterielebensdauer in ihren Bodenpflegegeräten mit Thin Plate Pure Lead (TPPL) Technologie

Universität erhöht Batterielebensdauer in ihren Bodenpflegegeräten mit Thin Plate Pure Lead (TPPL) Technologie

MEHR ERFAHREN

Fallstudie

Lebensmittel- und Getränkehändler entscheidet sich für NexSys® TPPL Thin Plate Pure Lead (TPPL)-Technologie für die Power Lift Truck Flotte

Lebensmittel- und Getränkehändler entscheidet sich für NexSys® TPPL Thin Plate Pure Lead (TPPL)-Technologie für die Power Lift Truck Flotte

MEHR ERFAHREN

Fallstudie

Globaler Möbelhersteller setzt auf NexSys® TPPL Thin Plate Pure Lead (TPPL)-Technologie für seinen neuen Produktionsstandort

Globaler Möbelhersteller setzt auf NexSys® TPPL Thin Plate Pure Lead (TPPL)-Technologie für seinen neuen Produktionsstandort

MEHR ERFAHREN

Case Study

Powersports Aftermarket Distributor Slashes Battery Operating Costs and Ends Change-outs with Thin Plate Pure Lead (TPPL) Technology

Powersports aftermarket distributor slashes battery operating costs and ends change-outs with Thin Plate Pure Lead (TPPL) technology

MEHR ERFAHREN

Fallstudie

Umstellung einer Gabelstaplerflotte von überfluteten Blei-Säure-Batterien auf NexSys® TPPL Thin Plate Pure Lead (TPPL)-Technologie

Umstellung einer Gabelstaplerflotte von überfluteten Blei-Säure-Batterien auf NexSys® TPPL Thin Plate Pure Lead (TPPL)-Technologie

MEHR ERFAHREN

Technical Article

Does your UPS battery meet data centre demands?

UPS systems guard against power failure in the data centre. TPPL batteries can cope with larger peak currents and offer advantages that help reduce TCO.

MEHR ERFAHREN

Technical Article

UPS Battery: Backbone of the Modern Data Centre

Data centre operators need access to reliable battery technologies to support their UPS. TPPL batteries deliver benefits that help data centre operators meet their challenges.

MEHR ERFAHREN

Technical Article

Overcoming Power Grid Instability in Data Centres

Power grid instability is a serious threat to data centre online time. Data centres need reliable UPS backup power complemented with high-performance battery technology.

MEHR ERFAHREN

Whitepaper

Can Battery Technology address the Changing Data Centre Landscape?

As society’s hunger for information rises, data centres need to respond. They need to source reliable UPS batteries that can cope with increasingly heavy strains.

MEHR ERFAHREN

Fallstudie

Einsatz von TPPL Advance-Technologie für die Unterstützung von Unterstationen

Einsatz von TPPL Advance-Technologie für die Unterstützung von Unterstationen

MEHR ERFAHREN

Fallstudie

Daimler reduziert Batterieausfälle mit ACE® praktisch auf null

Daimler benötigte eine Batterie mit höheren Reservekapazitäten, höherer Startleistung und längerer Lebensdauer bei höherer Zuverlässigkeit und geringeren Wartungskosten, um den sich wandelnden Anforderungen der heutigen Lkw-Fahrer gerecht zu werden.

MEHR ERFAHREN

Whitepaper

Planungsbezogene und technische Richtlinien für die Fernstromversorgung

Der Trend zu verteilten Netzwerken hat dazu geführt, dass Fernstromversorgung (RLP) zunehmend als alternative Methode zur Energieversorgung von Remote-Geräten eingesetzt wird.

MEHR ERFAHREN

Fallstudie

LEBENSMITTELGESCHÄFT RUMÄNIEN

Der Aufschwung bei Besuchern und den Einnahmen durch den Tourismus überzeugte den Eigentümer des Lebensmittelgeschäfts der Stadt, sich mit einem lokalen Unternehmen für die Konzeption und Installation von Anlagen für erneuerbare Energien in Verbindung zu setzen, um dem wachsenden Strombedarf des Geschäfts gerecht zu werden.

MEHR ERFAHREN